Gate drivers used to switch MOSFETs and IGBTs at high frequencies can dissipate significant amount of power depending on the operating conditions. It is important to determine the driver power dissipation and the resulting junction temperature in the application to ensure that the part is operating within acceptable temperature limits. Read about our analysis of power dissipation and thermal considerations for high voltage gate drivers here!
- Embedded Security Webinar Series
- Machine Learning
- Power Electronics
- Dev Tools & OS
- Dev Kit Selector
- White Papers
- Upcoming Activities & Events
- Embedded Executive
Previous White Paper
Download a guide here detailing what you need to know about Energy Harvesting, and getting started with inc...
We also recommend:
ON Semiconductor released the NXH40B120MNQ family of full SiC power modules for solar inverter applications.
The price of the multilayer ceramic capacitors (MLCCs) has risen sharply over the past several years, tracking the expansion in the number of power supplies used in various industries.
Vicor announced the relase of the DCM5614, a new isolated DC-DC converter. The converter is isolated and regulated at 270V-28V.
11 of you – that’s right, ten more than normal – will be saving $12.95. We have 11 MAX11131BOB Breakout Boards for winners of this week's raffle.
Optimize your power distribution network to achieve a target impedance, while avoiding high Q resonances that can cause rogue waves.
Vishay has expanded its offering of FRED Pt Ultrafast recovery rectifiers with eight new 100 V and 200 V devices in the eSMP series SlimSMAW (DO-221AD) package with a low 0.9 mm profile.
VARTA Microbattery's trade fair presentation focused on Nickel-Metal Hydride cells, Lithium coin cells, and Lithium-Ion coin cells (microbatteries) as energy supply for applications in the IoT.
Vishay Intertechnology introduced an 80V TrenchFET Gen IV n-channel power MOSFET in the 6.15mm x 5.15mm PowerPAK SO-8 package.
Download a guide here detailing what you need to know about Energy Harvesting, and getting started with incorporating it in your applications.
This topic is of interest to engineers wishing to understand the complexities of incorporating a superior converter design into a MHEV.
This guide shows you how to use a source measure unit (SMU) to perform DC measurements by reviewing instrument fundamentals, how to use SMUs, and examining the features that can help you set up...
HIR provides a long-term vision for the electronics industry, identifying future technology requirements and potential solutions.
IAR Systems launched a new version of its security development tool C-Trust.
Bicker Elektronik’s UPSI-1208IP-23UW with 12VDC output (8A) and UPSI-2406IP-24UW with 24VDC output (5.42A) are dust and waterproof in accordance with IP67.
Vicor’s DCM2322 ChiP family is a lower-power variant of the Vicor DCM3623 series.
STMicroelectronics in collaboration with MikroElektronika are creating four “Click boards” to extend STSPIN motor drivers for STM32-based designs to users of MikroElektronika prototyping boards.
Littelfuse announced an additional five series of high-temperature Alternistor TRIAC switching thyristors, designed for use as semiconductor switches in appliances and equipment.
The devices have a 4-pin TO-247-4L package to reduce switching loss by up to 35 percent over conventional 3-pin TO-247N packages.
The European Commission has predicted a 10x increase in demand for EU battery energy storage by 2050.