Infineon’s TRENCHSTOP IGBT7 and EC7 Diode Target Industrial Drive Apps

March 14, 2019 Alix Paultre

Based on micro-pattern trench technology, the TRENCHSTOP IGBT7 chip offers lower static losses compared to the IGBT4, with an on-state voltage reduced by 20 percent. The power modules feature a maximum allowed overload junction temperature of 175°C. Additionally, they are marked by softer switching and an improved controllability.

The new 1200 V TRENCHSTOP IGBT7 modules are designed with the same pin out as TRENCHSTOP IGBT4 modules but enable a higher output current in the same package, or the similar output current in a smaller package. All module types are equipped with Infineon’s reliable PressFit mounting technology for low ohmic resistance and reduced process time.

The TRENCHSTOP IGBT7 technology is offered in an industry-standard EasyPIM housing for the current classes 10 A and 25 A. For more power, the EasyPACK 2B carries 100 A. Lead types are FP10R12W1T7_B11, FP25R12W1T7_B11 and FS100R12W2T7_B11. 

For more information, visit www.infineon.com.

Previous Article
Wind River and Airbiquity Collaborate on Vehicle-to-Cloud OTA Solutions for Connected and Autonomous Cars

Wind River and Airbiquity are joining forces on creating essential technologies for an end-to-end software ...

Next Article
Phihong Adds Multi-Gig Transmission-Rate Compatibility to their Mini PoE Injector

Phihong expanded its series of IEEE802.3at compliant POEA30U-1AT Power-over-Ethernet mini single-port injec...