F&S to Reveal PicoCore MX8MM at embedded world

February 18, 2019 Laura Dolan

F&S released its 40 x 35mm PicoCore MX8MM module and will present it at embedded world in Nuremberg, Germany from February 26-28 in Hall 2, Booth 2-621.



It features NXP’s new i.MX8 Mini and uses a more advanced 14LPC FinFET process, yielding lower power consumption and higher clock rate for the Cortex-A53 and the Cortex-M4 cores.

It also offers lower-powered GCNanoUltra (3D) and GC320 (2D) graphics cores with video hardware acceleration with a capacity of 1080p60 resolution (HEVC H.265, VP9, H.264, VP8).

The PicoCore MX8MM sustains USB 2.0 host and OTG ports and supports 4x UART, 4x I2C, 4x SPI, and 8x PWM. Power is listed as +3.8V bis 5.5VDC, and the module runs at 3 Watts.

For more information, please visit https://www.fs-net.de/en/products/picocore/picocoremx8mm-with-nxp-i-mx8m-mini-processor/.

Previous Article
Arm Debuts eMRAM IoT test chip with Samsung, Cadence

The Musca-S1 test chip and an accompanying development board enable IoT SoC designers to evaluate eMRAM tec...

Next Article
OmniVision’s Automotive Image Signal Processor with Flicker Mitigation and HDR Over Automotive Temperature Range Hits the Market

OmniVision Technologies, Inc. released its OAX4010 automotive image signal processor (ISP) including the ne...