Boardcon Launched a Single Board Computer Powered by NXP i.MX 7 Processor With E-ink Screen

April 9, 2018 Boardcon Launched EINK-IMX7 SBC With E-ink Screen
EINK-IMX7 with E-INK
EINK-IMX7 with E-INK
EINK-IMX7 SBC
EINK-IMX7 SBC

Boardcon Embedded Design launched a new single board computer (SBC) powered by NXP i.MX 7Dual Applications Processor. The board runs Linux+ QT or Android 6.0.1 OS. It is the first SBC of Boardcon supports E ink screen, the low power, sharp and images, and light weight of dedicated E Ink make it well suited for many applications such as wearable devices, mobile devices, Signage and Displays, etc.

The EINK-IMX7 is composed of a carrier board and a CPU module(CMIMX7) via SODIMM200 connector.

EINK-IMX7 Specifications

* Processor: NXP i.MX7 Dual with 2x ARM Cortex-A7 cores @ 1.0GHz, Cortex-M4 MCU @ 200MHz

* RAM: 1GB DDR3L

* Flash: 8GB eMMC

* Power: DC 5V/2A

* Interfaces: 1x USB Host, 1x USB OTG, 4x UART (2x Debug, 2x DB9), 2x CAN, LCD(TTL), 2x MIPI (Camera, LCD), EPD, Gigabit Ethernet, HDMI, Audio, SD, SIM, RTC, PCIE(3G), SIM, Camera

* Operating system: Linux+QT, Android6.0.1

* Dimension: 140.0mm x 90.0mm
Previous Article
Need a full IP65, 5xGLAN, 4x USB, High brightness 1000 nits Resistive touch Panel PC?
Need a full IP65, 5xGLAN, 4x USB, High brightness 1000 nits Resistive touch Panel PC?

19'' Intel Skylake i5-6200U high brightness 1000 nits P-Cap. Panel PC for Outdoor Rail Ultrasonic in-vehicl...

Next Article
Pixus Offers Range of Ventilated Panels for Instrumentation Cases
Pixus Offers Range of Ventilated Panels for Instrumentation Cases

Pixus Technologies, a provider of embedded computing and enclosure solutions, has several sizes for its ven...