Vicor's new bi-directional converter enables hybrid 48V/12V power systems

June 5, 2018 ECD Staff
 

Vicor has announced a bi-directional, non-isolated fixed-ratio converter for hybrid 48V/12V power systems in data center and automotive applications.

The 2317 NBM is a bi-directional converter capable of providing up to 750W continuously at 48V from 12V, or at 12V from 48V, with over 98% peak efficiency. With up to 1kW of peak power capability (for up to 2ms) in a 23 x 17 x 7mm surface-mount package, the NBM (NBM2317S54D1464T0R) provides a complete solution with no external circuitry needed. By switching at 2MHz, the NBM provides low output impedance and fast transient response to dynamic loads. The NBM incorporates hot-swap and inrush current limiting, increasing power system density and conserving board space and other resources.

In data centers that are still relying on legacy 12V distribution, the NBM supports 48V input GPUs using Power-on-Package (“PoP”) Modular Current Multipliers (“MCMs”) driven from a 48V node sourcing a small fraction (1/48) of the GPU current. Current multiplication overcomes the power delivery boundaries imposed by traditional 12V systems that limit higher bandwidth and connectivity. In data centers that have been upgraded to a 48V infrastructure, the NBM can be used to support legacy 12V loads.

In mild hybrid and autonomous vehicles using 48V, the NBM supports legacy 12V subsystems from efficient power distribution at 48V with or without dual batteries.

Previous Article
Maxim Provides True Fault Protection for High-Speed USB Ports and Industrial Voltage Applications

Get protection up to ±40V in packages that are smaller than you think.

Next Article
VPS is the Future of Navigation

GPS is alive and well, but the most accurate data will come from virtual positioning.

Compare Distributor Pricing & Part Availability

Enter Part Number