Over the past two decades Nuvation Engineering has developed data acquisition systems for a wide range devices and market applications. Based on our experience performing hundreds of engineering design projects, our engineers have identified several key considerations that require special attention during the planning, design, and development of data acquisition systems.
- Embedded Security Webinar Series
- Machine Learning
- Power Electronics
- Dev Tools & OS
- Dev Kit Selector
- White Papers
- Upcoming Activities & Events
- Embedded Executive
Previous White Paper
New technology from Arm is blending DSP and ML features into a low-power general-purpose processor for the ...
We also recommend:
Arm has been working on technologies that boost the signal processing and machine learning capabilities in the Arm Cortex-M55 processor.
NXP combined the target-specific optimization capability of the Glow compiler with Arm Cortex-M and Cadence Tensilica HiFi 4 DSP neural network operator libraries within the eIQ IDE.
QuickLogic Corporation announced that it has joined the CHIPS Alliance, the consortium advancing common and open hardware for interfaces, processors, and systems.
Octal flash device incorporating leading embedded AI processing with Renesas’ Dynamically Reconfigurable Processor (DRP) Technology targeted at Industrial IoT market.
The Visconti 4 image recognition processor integrates eight media processing engines, allowing it to execute eight applications simultaneously.
The implementation of Metrics simulator in the Cloud provides scalability so regression tests can run in parallel to complete in hours.
Architecture exploration of AI applications is complex and involves multiple studies. To start with, we can target a single problem such as memory access or can look at the full processor or system.
The RA microcontroller ecosystem has expanded with security, machine learning, and other building block solutions from partners like Arm, Alibaba, IAR, Qeexo, Qt, Toshiba, and wolfSSL.
At this point you’ve heard of RISC-V and how fast the technology and ecosystem are expanding. But, given that it's still relatively new, there aren’t a ton of dev kits out there. Until now.
The Orange Crab is a crowd-funded platform designed to Adafruit’s 50.8 mm x 22.9 mm Feather board specification, and supports all open-source toolchains.
New technology from Arm is blending DSP and ML features into a low-power general-purpose processor for the first time. What are the challenges? How far can we go?
Newark announced it has added the Portenta H7, a new offering from Arduino, to its portfolio of SBCs.
In this edition of the embedded insiders, Brandon and Rich ponder whether RISC-V is taking too long to become a mainstream technology, or if it will even ever be one.
New Codasip Bk7 64-bit core with 7-stage pipeline and able to support Linux.
The CHIPS Alliance announced it released the Advanced Interface Bus (AIB) version 2.0 draft specification on GitHub.
Mixel announced its MIPI® IP solution has been integrated into Perceive’s Ergo edge inference processor.
As the demand for increased functionality through advanced techniques such as data analytics and machine learning increases, the ability to handle software efficiently is vital to success.
The dual-band, multi-protocol CC1352R SimpleLink wireless MCU that supports both 2.4 GHz technologies like Bluetooth, Bluetooth 5 Low Energy, Zigbee, and Thread, as well as Sub-GHz connectivity.
Learn how your toolchain can be ready to meet the challenge of developing commercial-grade applications on RISC-V platforms.
WIN Enterprises announces the MB-50050 a mini-ITX SBC to serve as the basis for a flexible, general-purpose IoT gateway.