Created for extremes: Modular Embedded PC with XEON Power and 10x PoE

November 4, 2019 ICP Deutschland GmbH

With the MX1-10FEP, ICP Deutschland launches the first embedded PC of the new modular M series. The MX1 is designed to withstand extremes and has high computing power, flexible expansion options for hardware and applications in extreme environments. With the 1151 processor socket and the Intel® C246 chipset used, the MX1 supports XEON and Core I processors from Intel 8th generation. This generation brings a performance increase of up to 36% for XEON and up to 15% for Core I processors compared to the previous generation. Both 35 Watt CPU variants and CPUs with up to 80 Watt are supported. Up to 32GB ECC or non-ECC DDR4 2666 MHz RAM can be installed depending on the processor variant. The Intel HD graphics provides an HDMI, a display port and a DVI-I output. In the case with a volume of just 7.8 litres, three 2.5" installation frames, one of which is designed as a removable medium, two Mini PCIe slots with mSATA support, an M.2 2242/2260/2280 slot with PCIe x4 signal, an M.2 2230 and a PCI Express x16 interface can be accommodated. The latter interface is designed for the operation of expansion and graphics cards. The MX1 also offers connection options for remote power ON/OFF and remote reset. This allows the MX1 to be placed and operated even in places that are difficult to access. There is also space for one Intel i219-LM and one i210-IT GbE LAN port each, six USB 3.0, two USB 2.0, PS/2, two RS-232/422/485, two SIM card holders and three expansion slots for optional MX1 expansion modules. As an expansion module, fourfold LAN with RJ45 with and without PoE+ functionality, fourfold LAN with M12 connector with and without PoE+ functionality, a twofold RJ45 PoE+ module, an isolated fourfold combo RS-232/422/485 and 8-bit DIO interface and a Vehicle Power Ignition module are available. For example, the MX1 can be equipped with ten PoE connections for image processors. The MX1 can withstand ambient temperatures from -40 °C to 70 °C, depending on the CPU type, and can offer additional EN50155 and E-MARK certifications for vehicle and rail operation. With a voltage range from 9 to 48 volts DC, the MX1 covers a very wide range, industrially designed with reverse power control, overvoltage and overcurrent protection. ICP supplies the MX1 as a ready-to-use system with matching industrial RAMs and storage media to ensure that the extremes can also be exploited.

ICP. Industrial Computer Products ...by people who care!

Previous Article
Silex Insight Introduces Hardware Security Module (HSM) for Xilinx FPGA Devices

Silex Insight, a leading provider for flexible security IP cores, announce a collaboration with Xilinx, Inc...

Next Article
TAICENN customize 19.0-inch full IP65 protection stainless steel industrial panel PC for an industry customer

TAICENN customized and developed a 19.0 -inch full IP65 waterproof, dust-proof and anti-corrosion industria...