Analog Devices releases 60-VOUT, synchronous boost LED controller

June 29, 2018 Rich Nass

Analog Devices has released the Power by Linear LT3762, which is a 60-V output, high efficiency, synchronous, boost LED driver controller with a programmable internal LED PWM signal generator and spread spectrum frequency modulation that yield low EMI noise. The versatile LT3762 includes a rail-to-rail current sense amplifier, enabling high- or low-side current sensing that, in addition to synchronous boost, facilitates synchronous buck and buck-boost mode topologies and nonsynchronous SEPIC designs.

The LT3762’s 2.5- to 38.5-V input voltage range and synchronous operation suits it for automotive power systems, portable instruments, industrial applications, medical instruments and architectural lighting. An auxiliary on-chip buck-boost converter provides the necessary gate drive voltage in low voltage systems, and when combined with a 500-µA maximum quiescent current and 1-µA shutdown current (TA = 25°C), results in high efficiency over wide input voltage and output current ranges.

The LT3762’s optional spread spectrum frequency modulation can be enabled to reduce the effective switching frequency noise for systems where EMI is a concern. An on-chip PWM signal generator is synchronized to the internal oscillator for lowest noise performance. Internal PWM generation provides 250:1 dimming; external 3000:1 dimming or analog dimming can also be employed.

Other features of the constant current and constant voltage LT3762 include current mode operation with cycle-by-cycle current limiting, adjustable 100-kHz to 1-MHz switching, programmable undervoltage lockout, open LED and short-circuit protection with fault status indicators, LED overcurrent protection, and thermal shutdown. The part is available in thermally-enhanced 28-lead TSSOP and 4- by 5-mm QFN packages. Three temperature grades are available, with operation from –40°C to 125°C (junction) for the extended and industrial grades, and a high temperature grade of –40°C to 150°C.

About the Author

Rich Nass

Richard Nass is the Executive Vice-President of OpenSystems Media. His key responsibilities include setting the direction for all aspects of OpenSystems Media’s Embedded and IoT product portfolios, including web sites, e-newsletters, print and digital magazines, and various other digital and print activities. He was instrumental in developing the company's on-line educational portal, Embedded University. Previously, Nass was the Brand Director for UBM’s award-winning Design News property. Prior to that, he led the content team for UBM Canon’s Medical Devices Group, as well all custom properties and events in the U.S., Europe, and Asia. Nass has been in the engineering OEM industry for more than 25 years. In prior stints, he led the Content Team at EE Times, handling the Embedded and Custom groups and the TechOnline DesignLine network of design engineering web sites. Nass holds a BSEE degree from the New Jersey Institute of Technology.

Follow on Twitter Follow on Linkedin Visit Website More Content by Rich Nass
Previous Article
IoT chip maker Adesto buys networking pioneer Echelon

By Nick Flaherty www.flaherty.co.uk Acquisitive chip designer Adesto Technologies is to buy low power netw...

Next Article
Bel Power Solutions offers a rugged 30-W isolated DC-DC converter

The 0RQB-30Y05L provides its output power from an input range of 16.8 to 137.5 VDC and operates on all nomi...