Thales Launches InterSense NavChip Series 3 Precision 6-axis IMU

July 9, 2019 Alix Paultre

Thales announced the availability of its NavChip Series 3, the latest in its family of high-precision Inertial Measurement Units (IMUs), with advanced proprietary signal processing. The NavChip Series 3’s environmental ruggedness makes it well-suited for applications such as drone navigation, robotic control, camera/antenna platform stabilization, augmented/virtual reality, aiming and alignment, and GPS/INS integration.

Features include a bias in-run stability of 3º/hr (typical), 5º/hr (max.), and can address applications over the +/- 16 g operating range (other ranges available upon request). Other features include a 1,000 Hz update rate, embedded AHRS, which reduces system complexity, cost and power consumption, and the ability to accept other external inputs such as a magnetometer to enhance the overall systems’ performance.

The NavChip Series 3 is fully factory calibrated for bias, scale factor and misalignment over the full -40 °C to +85 °C operating temperature range, in a small and easily mountable package with low power dissipation. Additional features include a full-scale acceleration range of +/- 16 g, and a full-scale angular rate of 2,000 degrees/sec. Specifications include a gyro bias in-run stability of 3º/hr, 5º/hr (max.); angular random walk of <0.18º/√hr; velocity random walk of <0.3º/√hr and an acceleration noise performance better than 83 µg/√Hz.

Provided in a package measuring 12.5 x 24.4 x 6.1 mm, the 3 g device has a power consumption of 135 mW, and selectable built-in-test (BIT) modes for command and continuous diagnostic monitoring. Multiple output interfaces, including I2C, TTL UART or SPI-compatible provide the designer with exceptional flexibility. The external sync pin can accept optional GPS pulse-per-second or faster synchronization signals. Single supply operation is from 3.25V to 5.5 V.

For more information, visit www.thalesdsi.com.

Previous Article
SAPPHIRE Releases FP5R Series Embedded Motherboards for latest AMD Ryzen Embedded R-Series SoC

SAPPHIRE Technology will support the AMD Ryzen Embedded R1000 SoC with the AMD Radeon Vega 3 Graphics on th...

Next Article
DUAGON-MEN-GROUP Integrates OEM Technology Solutions Australia

OEM Technology Solutions is now part of the DUAGON-MEN-GROUP positioning the organization as a provider of ...