Mouser Electronics is now stocking NXP Semiconductors’ i.MX 7ULP applications processors, based on Fully-Depleted Silicon-on-Insulator (FD-SOI) technology. The i.MX 7ULP applications processors use Arm Cortex-A7 and Cortex-M4 cores with separate isolated domains, and include both 3D and 2D graphics processing units (GPUs). The Cortex-A7 and Cortex-M4 cores enable the device to run a rich operating system like Linux on the Cortex-A7 core, and a real-time operating system (RTOS) like FreeRTOS on the Cortex-M4 core.
The processors provide 32 Kbytes of L1 cache instruction memory, 32 Kbytes of L1 cache data memory, and 256 Kbytes of L2 cache, as well as 512 Kbytes of SRAM, and also support 32-bit LPDDR2/LPDDR3 memory interfaces and GPIO, I2C, SPI, UART, and USB interface types. The processors offer a deep sleep suspend power consumption of just 50 µW in optimized configurations, while low leakage and operating voltage scalability are delivered via reverse and forward body biasing of the transistors.
The i.MX 7ULP Evaluation Kit contains a system-on-module (SOM) board that connects to an associated baseboard, the evaluation kit enables out-of-the-box startup and supports reconfiguration for MIPI displays. The SOM provides 1 GByte of LPDDR3, 8 MBytes of Quad SPI flash, a Micro SD 3.0 card socket, Wi-Fi and Bluetooth® connectivity, USB 2.0 OTG with Type C connector, and an NXP PF1550 power management IC.
Learn more at www.mouser.com/nxp-imx-7ulp-applications-processors.