Picocom Selects UltraSoC In-System Analytics and Monitoring IP for 5G New Radio Small Cell SoC

June 18, 2020 UltraSoC

CAMBRIDGE, UK – 17 June 2020

UltraSoC today announced that Picocom, the 5G open RAN baseband semiconductor and software specialist, has selected UltraSoC’s hardware-based analytics and monitoring IP for use in Picocom’s upcoming baseband system-on-chip (SoC) for 5G small cells. The UltraSoC IP enables Picocom and its customers to monitor, analyze and fine-tune the performance of their systems throughout the whole product lifecycle, starting in the lab for silicon bring-up and software development, through to deployment and in-field optimization.

Picocom President Peter Claydon commented: “As a result of this partnership with UltraSoC, Picocom customers can accelerate and de-risk their own system development and optimize system performance in the field over the lifetime of their product. This is particularly important as the mobile industry starts to adopt open RAN and virtual RAN principles, which will see software from different vendors running code on the same hardware, with frequent software upgrades over the product lifecycle.”

Picocom provides open RAN standards-compliant baseband SoCs and carrier-grade software products for 5G small cell infrastructure. The company’s forthcoming distributed unit (DU) baseband offload system-on-chip (SoC) is designed to be deployed in buildings to increase 5G coverage and reduce the processing load on 5G macrocells under the open RAN initiative. By partnering with UltraSoC to add in-field monitoring and analytics to its products, Picocom aims to further empower wireless vendors and new market entrants to compete in the rapidly evolving disaggregated telecoms RAN market.

Picocom has selected a suite of UltraSoC’s IP to enable monitoring and development of software for its SoC as a whole, from IP definition through to software/code refinement. This addresses the SoC’s CEVA XC12 DSPs, control processors, Arteris FlexNoC (Network on Chip) interconnect, custom accelerators, DDR controller, Ethernet interface, and other logic, in a single monitoring and analytics infrastructure. This makes it much easier for Picocom’s engineers and its customers to fine-tune performance. Picocom will also deploy UltraSoC’s USB IP, allowing customers to debug systems at high-speed in a ‘closed chassis’ through a standard USB port.

Using UltraSoC’s hardware monitoring and analytics infrastructure will allow Picocom to offer unique optimization features across its product line. Data on the behavior of the system is captured in real-time, and with detailed information about system timing – essential for demanding applications such as wireless communications. Just as importantly, UltraSoC’s on-chip monitors feature integrated ‘smarts’: data can be pre-processed and analyzed locally on-chip, giving the engineer deep insight into system operation, without the need to route excessive volumes of data off-chip.

UltraSoC CEO Rupert Baines said: “We are proud to be working with Picocom, an innovative company with extensive experience in the field of small cells. Too many silicon companies regard post-silicon debug and optimization as ‘someone else’s problem’. The fact that Picocom has selected such a comprehensive suite of UltraSoC IP demonstrates a serious commitment to helping its customers deliver the best possible products, on time – and with reliability and upgradeability ‘baked in’ from day one.”

For more information visit www.ultrasoc.com or www.picocom.com

Previous Article
Chenbro RB14604 - Affordable Level 6 1U Rackmount Server Barebone for Xeon®E
Chenbro RB14604 - Affordable Level 6 1U Rackmount Server Barebone for Xeon®E

Chassis Featuring Intel® Server Board M10JNP2SB and 4 Hot-Swap 3.5” Drive Bays

Next Article
KORE and Dexcom Partner to Bring Innovative Solution in Response to Global Pandemic

KORE, the independent global IoT leader, today announced an ongoing partnership with Dexcom, Inc., the worl...