embedded world 2018: Endrich presents technical news and application examples for the IoT

February 6, 2018 ECD Staff

Endrich Bauelemente GmbH will give a comprehensive overview of their portfolio in the field of active components at the embedded world in hall 1, booth 259.

In the field of displays and embedded systems, Endrich introduces display systems from DLOGIC, including versatile Linux-based touch display computers, which are used in many different applications due to their high flexibility in design. The special focus is on industrial and medical requirements thanks to high temperature ranges, a long-term availability of 7 years and special robustness. In addition, touch monitors with all-in-one connectors from DLOGIC will be on display.

In cooperation with faytech AG, prototypes of the innovative docking station series will be tested on the stand for the first time worldwide. The modular system decouples the display unit from the embedded PC unit via a patented interface that transmits not only video but also backlight and touch signals. This allows a wide selection of display sizes with scalable computing power.

The 868MHz frequency is about Lora derivates from Aurel, the LoraWan solution on the one hand, and an example of a proprietary network on the other. In the case of the clocking components, SiTime innovations are in focus. These include AEC-Q100 qualified MEMS oscillators. The SiT2014 / 25 and SiT8924 / 25 oscillators deliver in terms of ruggedness up to a 30-fold increase in performance compared to previously available solutions. They have been specially developed for Automotive Saftey Integrity Level (ASIL) compatible automotive applications. In addition, new MEMS Spread Spectrum Oscillators and Ultra-Low Jitter Differential Oscillators can be seen for the new challenges associated with Ethernet applications.

Finally, the product area of ​​electromechanics includes new fans and blowers from ADDA, NMB, AVC, Fulltech and Ecofit. Among other things, fans are shown for use in logistics, eg in industrial trucks, where fans are often exposed to extreme conditions such as shock, vibration, large temperature ranges, etc. In addition, ADDA's new AQ range of fans already provides protection against the penetration of solid debris / dust (IP6x) and water (IPx8) as standard.

In addition, a broad portfolio of DIP switches, pushbuttons, safety mats, multi-function switches, limit and tilt switches and relays will be on show. The high quality and the wide range of products from Citizen, ECE, Willow / Durakool, WIN Industry and Knitter make it possible to provide the right component for almost every application. For example, Citizen offers tactile buttons in a particularly slim and compact design with excellent dust and water protection (IP57) as well as high click performance and reliability.

Previous Article
Experience Pentair at embedded world 2018
Experience Pentair at embedded world 2018

At this year's embedded world, from 27.02. to 01.03.2018 in Nuremberg, presents Pentair in the four subject...

Next Article
embedded world 2018: The latest technology from PEAK-System
embedded world 2018: The latest technology from PEAK-System

PEAK-System Technik, manufacturer of hardware and software for CAN, CAN-FD and LIN applications, presents n...