The space where the electronics meets the mechanics ends up being a place of disconnect. Who owns that domain, the mechanical engineer or the electrical engineer? Good question, and that’s where I started the discussion with Michael Randt, Founder and CEO of Trinamic in this week’s Five Minutes With…discussion. As the IoT proliferates, particularly in the industrial, automation, and manufacturing industries, the world of “mechatronics” is key to the success of a design. And the problem likely will get worse before it gets better.
Newark’s new findings from its global user survey on the Raspberry Pi single-board computer reveals why and...
We also recommend:
My definition of Industry 5.0 has to do with putting people and robots into the same environment, and having them work and operate together, safely and securely.
Some corners of the electronics universe go years or decades without a significant technology upgrade. Passive electronic components are a good example. Then there’s also embedded programmable logic.
Rugged Devices Used in the Oil & Gas, 5G Cell Towers, and Smart Grids Need to Operate Reliably in Extreme Heat and Cold.
New evaluation kit simplifies evaluation of Renesas’ R-IN32M4-CL3 IC for industrial Ethernet communication with CC-Link IE TSN.
Macnica ATD Europe announced its parent company, Macnica, is now offering Macnica SLVS-EC IP versions for both Intel and Xilinx devices.
Vishay Intertechnology released a new series of automotive-grade miniature aluminum electrolytic capacitors that couple high ripple currents up to 3.8A with temperature operations up to +105 °C.
The newest member of the Digi IX industrial cellular router family, can operate well with digital signage, asset monitoring, and retail applications
Digital transformation has taken on a new meaning—and a new urgency—in the face of the ongoing pandemic. New safety and compliance requirements have been emerging in the enterprise world.
The Litemax 2.5" Pico-ITX Boards are compact Embedded Boards in the size of 100x72mm, it creates and fulfills various space-constrained applications.
All five COM-HPC module standards (A ~ E) will utilize 800 pins via two new high-speed connectors with at least 4 x 100 pins each and 2 x 400-pin board –to-board connectors.
Designed to meet the modern requirements of mains-, 5V USB-, and battery-powered equipment
As extra automated systems become packed onto factory floors, often near human workers, equipment designers must take care to meet applicable equipment directives.
First-of-its-kind concept aims to accelerate the transition from proofs of concept to volume production, and advance the adoption of piezoelectric (Piezo) MEMS in new applications.
The series provides workstation-grade computing capability and providing balance between reliability and power budget for applications of edge computing.
The two companies are developing and will jointly market 650V/50A and 1200V/10A industrial modules.
Trying to decide between Off the Shelf and custom hardware? Don't forget to consider these important factors!
Collaboration designed to improve quality inspection with AI-powered data analysis for Industrial IoT
D3 Engineering announced their DesignCore RS-6843AOP and RS-6843AOPU mmWave Radar Sensors.
Integrated Global Shutter sensor portfolio provide common architecture and resolutions up to 45 Mp.
MicroSAM is the first PICMG specification in a series of IIoT-related open standards to reach ratification.