Infineon has released the KIT_40W_AMP_HAT_ZW, an HD audio Hardware Attached Top (HAT) for the Raspberry Pi Zero W, Raspberry Pi 3, and Raspberry Pi 4 driven by the MERUS MA12070P multilevel class D audio amplifier. The HAT amplifies signals with up to 40 W instantaneous peak power at 4 Ohm, and is capable of playing 24-bit audio at sample rates as high as 48 KHz.
The onboard MERUS amplifier does not use a filter-coil at the output filter, reducing BOM cost and area. The HAT can be configured in dual-channel bridge-tied load (BTL) or single-channel parallel bridge-tied load (PBTL) modes for Multiroom, TWS, or subwoofer applications.
The KIT_40W_AMP_HAT_ZW relies solely on the 5 V/2.5 A USB power supply used by the host Raspberry Pi board. Paired with a ~6700 mAh power bank, it can provide up to 20 hours of playback time.
The KIT_40W_AMP_HAT_ZW is compatible with the Raspbian Linux distribution and streaming applications such as Volumio, moOde Audio, and JustboomPlayer. For more information, visit www.infineon.com/kit-40w-amp-hat-zw.
About the AuthorFollow on Twitter Follow on Linkedin Visit Website More Content by Brandon Lewis