D3 Engineering Releases DesignCore Carrier Board for NVIDIA Jetson Xavier NX Module
April 13, 2020
News
D3 Engineering announced the release of its new DesignCore? Carrier Board. The board was developed so engineers can quickly connect multiple cameras or sensors with the NVIDIA Jetson Xavier NX module.
D3 Engineering announced the release of its new DesignCore® Carrier Board. The board was developed so engineers can quickly connect multiple cameras or sensors with the NVIDIA Jetson Xavier NX module to enable AI at the edge.
With a serial link, sensor data is delivered then deserialized into MIPI CSI-2 data for consumption. Due to this, sensors can be placed up to 15 meters from the processing unit. Hardware-level synchronization capabilities are provided by an on-board FPGA.
The company is a Jetson Preferred Partner for camera development within the NVIDIA Preferred Partner Network. Being within the network allows D3 Engineering access to the Jetson camera toolchain, enabling the company to deliver high-performance, cost-optimized embedded vision systems based on the Jetson platform.
For more information, visit www.D3Engineering.com.
Perry Cohen, associate editor for Embedded Computing Design, is responsible for web content editing and creation, podcast production, and social media efforts. Perry has been published on both local and national news platforms including KTAR.com (Phoenix), ArizonaSports.com (Phoenix), AZFamily.com, Cronkite News, and MLB/MiLB among others. Perry received a BA in Journalism from the Walter Cronkite School of Journalism and Mass Communications at Arizona State university.
