New High Side Switch ICs with User-Definable Protection Achieve Optimized Performance in Automotive Applications

November 17, 2020 ROHM USA.

ROHM has announced the development of a new family of four AEC-Q100 qualified high side switch ICs targeting the automotive market. Available in both 1- and 2-channel variants with RDS(on) ratings of 45mΩ, 70mΩ and 90mΩ, these IPDs (Intelligent Power Devices) incorporate multiple protection functions, ranging from overcurrent protection (OCP) and thermal shutdown (TSD) to open load detection (OLD) and under voltage lockout (UVLO), as well as a diagnostic output function (ST) for error detection.

In addition, the 70mΩ BV2HD070EFU-C and 45mΩ BV2HD045EFU-C/BV2HC045EFU-C 2ch high side switches feature variable OCD and OCD mask functions that allow users to set limits for the overcurrent threshold and time to achieve the optimum overcurrent protection for a given load. Built-in double error flags make it possible to distinguish between two different fault types for each channel output.

“These smart IPDs allow users to develop optimized solutions for resistive, inductive and capacitive loads in automotive applications, such as automotive ECUs and vehicle cabin climate control,” stated Nobuyuki Ikuta, Senior Solutions Marketing Manager at ROHM USA.

ROHM Media Contact

Travis Moench

ROHM Semiconductor

858.625.3600

tmoench@rohmsemiconductor.com

Agency Contact

Heather Savage

BWW Communications

720.295.0260

heather.savage@bwwcomms.com

Previous Article
3 Next-Gen SiC Semiconductor Applications in Automotive
3 Next-Gen SiC Semiconductor Applications in Automotive

Silicon carbide semiconductors have risen in popularity as a growing number of engineers choose them over p...

Next Article
Low Voltage Battery Monitoring for High Voltage Electric Vehicles
Low Voltage Battery Monitoring for High Voltage Electric Vehicles

If you are not already driving an electric vehicle (EV)—hybrid electric vehicle (HEV), plug-in hybrid vehic...