 |
|
GEN 2 Harsh Environment RFID Tag
|
Gaorfid
GEN 2 Harsh Environment RFID Tag |  |
|
32-bit • Based on a 1.8 V ARM7TDMI core operating at up to 55 MHz • Integrated 64K byte flash
|
GAO Tek Inc.
TEBSAM7S |  |
|
Ruggedizable hybrid signal processing 6U VME/VXS (VITA 41) board • Two Altera Stratix II GX FPGAs for I/O, routing, and processing • Two clusters of two ADSP-TS201S TigerSHARC DSPs 57.5 GOPS 16-bit fixed point, 14.4 GFLOPS floating-point processing power, four link ports per DSP at 1 GB/s each • Two link ports routed to the ATLANTiS FPGA • Two link ports routed for interprocessor communications, 24 Mb of on-chip RAM per DSP • Static superscalar architecture • Dual ATLANTiS framework • 2.5 GBps simultaneous external input and output • Four link ports at up to 1 GB each routed from the onboard DSPs, 32 LVDS pairs (64 pins), 12 channels of high-speed SerDes transceivers • Up to 1 GB of onboard DDR2 SDRAM • BittWare’s FINe PCI bridge chip, 32-bit/66 MHz PCI, GbE • One link port routed to ATLANTiS • 128 MB of flash memory for booting of DSPs and FPGA • 6U VME form factor, VITA 41/VXS (VMEbus Switched Serial)
|
BittWare, Inc.
GT-6U-VME |  |
|
MPE chassis • Employs patented two-phase cooling technology (SprayCool) for use in mission critical military applications • Scalable: 4-21 slots for 6U x 160 mm VME, VPX, VXS, CompactPCI or CompactPCIe (EXP.0) electronics • High performance: 100-500 W slot with optional MIL-STD-704 power • Configurable I/O panel, power supply, accepts both COTS, proprietary cards, including air cooled cards, with minimal modifications • Tested to MIL-STD-810, MIL-STD-461 • Swap: Maximizes size, weight, and power consumption at up to 2X improvement over traditional cooled enclosures •
-1,500 ft. up to 100,000 ft. including unpressurized environments, -65° C to +71° C
|
ISR
MPE Enclosure |  |
|
Quad 14-bit, 125 MSps A/D digitizer PMC (Virtex-4 FX and SX/LX) with optical transceivers (optional: sFPDP) • Four 14-bit, 125 MSps A/D channels • Custom external clock and trigger inputs • Dual Virtex-4 FX and LX/SX FPGA architecture • QDR2 SRAM and DDR2 SDRAM • PCI-X 64-bit 133/66 MHz • Serial FPDP with optical transceivers
|
4DSP
AD484 |  |
|
A new series of USB analog input modules • Units can sample inputs up to 500 KHz for the board’s 16 single-ended or 8 differential input channels • High-speed USB 2.0 device with up to 500 KHz sampling rate • All functions fully software configurable • 16-bit and 12-bit models with 16 single-ended or 8 differential inputs • Eight input ranges, unipolar or bipolar • Auto calibration and real-time hardware calibration and oversampling for accurate data • Unique channel-by-channel programmable gain feature • Data buffer for A/D • Synchronous, asynchronous, and timed trigger modes • 16 high-current digital I/O lines • 16-bit counter/timer for event counting or frequency generation • USB/104 form factor for OEM embedded applications
|
ACCES I/O Products, Inc.
USB-AI Series |  |
|
A 45 nm Quad-Core Intel Xeon processor-based enterprise-class storage networking appliance • Designed for network-centric service applications • Core architecture built around the Intel 5000P chipset • Supports two Quad-core Intel Xeon processors, 8 fully buffered DIMMs, and two PCI Express networking modules • Dedicated onboard Vitesse RAID controller supports 12 hot-swappable hard drives, while a Cavium encryption engine offloads layer 4 processing to reduce CPU load and deliver more efficient system performance • Supports two network modules for easy customization • Range of module choices: fibre, fibre bypass, or a host of GbE RJ45 modules
• Shock and vibration tolerant • Built-in redundancy
|
Lanner Electronics, Inc.
RS12-38700 |  |
|
An Advanced Mezzanine Card offering signal processing performance and bandwidth in a highly compact package • First single-width, full-height AdvancedMC card to be based on Texas Instruments (TI) multicore TMS320TCI6487 DSP • Suitable for wireless baseband and other processing-intensive applications such as WiMAX and Long Term Evolution of 3GPP (LTE) • Three software programmable TCI6487 DSPs, each containing three high-performance C64x+ cores running at 1 GHz as well as 3 MB on-chip memory • Multicore DSP provides significantly more effective performance than TI’s single core TMS320C6455 device, and also affords a myriad of high-speed peripherals including Gigabit Ethernet, DDR2, antenna interface links (OBSAI/CPRI), and two Serial RapidIO (SRIO) interfaces • Includes a complementary, customer-programmable, Xilinx Virtex-4 FX100 FPGA for additional parallel processing • The combination of DSPs and FPGA on the board allows an application to be balanced and optimized for the most effective use of system resources • Front panel interface to three full rate CPRI or OBSAI antenna links plus a configurable clock/sync interface supporting OBSAI RP1, thus providing industry-standard links to wireless remote radio head • It incorporates a Tundra Tsi578 SRIO switch for a full low-latency, high-bandwidth SRIO infrastructure between processing elements and multiple 10 Gbps external connections, two to the AMC backplane and one to the front panel • Broadcom BCM5389 supports multiple Gigabit Ethernet links on and off-card • The module can provide the baseband processing required for a 3-sector WiMAX base station, which can connect up to 100 small businesses or over 500 households to the Internet • MIMO 2 x transmit and 2 x receiver support improves the link bandwidth and Quality of Service
|
CommAgility
AMC-6487C |  |
|
19-inch Powershelf simplifies design and helps shorten time-to-market • RoHS compliant
• 1U height, 18.3" width, 16" depth powershelf • Holds 3 D1U series power supplies • Hot insertion/removal • Blind-docking connection • Lug DC output connection for 2 AWG cables
• I2C interface • Signal connector • Optional shelf to shelf signal connector (up to 2 shelves in parallel)
|
Murata Power Solutions
S1U-3X Power Shelf |  |
|
Matrix-514 is an ARM9-based Linux ready industrial embedded computer • Four Ethernet and four RS-232/422/485 ports and USB host and SD socket. • Low power ARM9 RISC CPU • 16 MB Flash and 64 MB SDRAM • Pre-installed Linux 2.6 OS • Four 10/100 Mbps Ethernet ports • Four RS-232/422/485 ports • Gnu C/C++ tool chain included
|
Artila Electronics. Co., Ltd.
Matrix-514 |  |
|
An off-the-shelf development board for embedded electronic development and rapid prototyping • Starting point for developing a vast array of electronic products ranging from GPS location units, to mobile phones, PDAs, and specialized embedded electronic devices • Provides for a wide range of ARM9 processor cores and supports a range of add-on functionality including GPS location, GPRS data transfer, Wi-Fi, Bluetooth, and a three mega pixel camera • Using the Snapper System modules to provide the core processor function, developers can choose a Marvel PXA270, PXA255 or Cirrus Logic EP9315 CPU • Ethernet, USB, Serial • Optional Bluetooth and Wi-Fi connectivity
|
Bluewater Systems
Rig 200 |  |
|
Open frame chassis for test/debugging • No side or back walls around card cage area, leaving it open for easy access • Designed with the high (and flexible) power and cooling requirements for VPX (VITA 46/48) systems • Any 3U or 6U backplanes can be used • VME/64x, VXS, CompactPCI, and other backplane architectures can be used • A rugged modular aluminum construction, can support up to 21 slots at .8" or 17 slots at 1" pitch • Front accessible test points and monitoring LEDs for all VME, VPX, VXS, and CompactPCI voltages • Includes +3.3V, +/-5V, +/- 12V, +/- 24V, and +/- 48 VDC • Features high-performance cooling with 3 x 150 CFM fans under the card cage • Fans are speed controlled with fan fail indication • Rear A/C Power Entry Module (PEM) with fuses, GND Stud, Front located ESD jacks • Offers full Rear Transition Module (RTM) support
|
ELMA Electronic
E-Frame |  |
|
20 Gbps programmable Cavium OCTEON / FPGA AMC • CEN-RL20 Cavium OCTEON Daughter Card • One (1) Cavium OCTEON 38XX or 58XX processor • 4 to 16 MIPS64 processors • 10 Gbps full-duplex application performance • Advanced security and intelligent application hardware acceleration including TCP, pattern matching, and compression/decompression • Memory: 2 GB DDR2 SDRAM (SODIMM); two (2) 36 MB RLDRAM, 64 MB flash • Front panel mini-USB serial console port • CEN-RL20 Xilinx Virtex-5 FPGA Base Card • One (1) Xilinx Virtex-5 LX110T FPGA for I/O, processing, and functional customization • Memory: Two (2) 18 MBit QDR memory (10 Gbps+ bandwidth), 64 MB DDR2 SDRAM, 64 MB flash • Custom, third party, or off-the-shelf IP support • Support for one fabric and four telecom clocks • 20 Gbps wirespeed architecture • 20 Gbps packet streaming bandwidth via dual SPI4.2 interfaces between Cavium OCTEON processor and Xilinx Virtex-5 FPGA • Front panel 10 Gbps CX-4 I/O connector to Xilinx Virtex-5 FPGA • Multiple 1 GbE, 10 GbE (XAUI), PCI Express, and Serial RapidIO backplane interfaces • Ports 0 & 1: 1 GbE • Ports 4-7, 8-11, 17-20: 10 GbE, PCIe, SRIO • Robust Module Management Controller (MMC) • CorEdge Networks MMC IPMI firmware included • Full hot swap support using on-board Microswitch • On-board voltage and temperature sensors • Persistent store for module specific config data • Specification Compliance • PICMG AMC.0 R2.0 Specification • Intelligent Platform Management Interface v1.5 • SCOPE Alliance AMC Hardware Profile v1.0
|
CorEdge Networks, Inc.
CEN-RL20-CAVM |  |
|
Core Duo based 6U CompactPCI Express Single Board Computer • 6U CompactPCI Express form factor per PICMG EXP.0 system slot specification • PICMG 2.16 compatible • Pentium Core Duo processor @ 1.66 GHz • Supports two PMC sites, one of which optionally supports XMC modules • E7520 chipset for PCIe support and high memory bandwidth • Single-slot, 4HP design with option for additional one-slot storage module
|
Dynatem, Inc.
EPD |  |
|
Inductors that combine high performance and a wide inductance range in challenging EMI operating environments • Rugged packaging • RoHS-compliant lead material • Inductance range from a low level of 0.31 UH to an upper range of 2.2 uH • DCR is specified from 0.75 to 4.0 mOhms maximum over a maximum current rating from 20 to 42 A • Compatible with temperatures ranging from -55 °C to +125 °C • Custom-designed DR370 inductors can be specified to meet unique circuit requirements
|
Datatronics Distribution
DR370 Inductor |  |
|
Fieldbus ASIC for FOUNDATION fieldbus and PROFIBUS PA • Fully compatible to Yamaha YTZ420 ("FIND1+") ASIC • Suitable for field devices and controllers • Fully pin compatible to Yamaha YTZ420 • Fully software compatible to Yamaha YTZ420 and FRONTIER-1+© • Ultra-Low power consumption suitable for field devices • Compliant to IEC 61158-2 Physical layer at 31.25 kbps • Compliant to IEC 61158-4 Data Link layer • RoHS compatible industry standard 44-pin PQFP package • Operating voltage - 2.7 V to 3.6 V • 128 byte FIFO allows to store a complete frame of most types
|
Softing North America
UFC100-F1 |  |
|
Comtel’s VME64x 21-slot backplane per ANSI/VITAV 1.1-1997 • 6U backplane includes J1, J2, and J0 • 10-layer stripline controlled impedance construction • SMD technology for excellent signal integrity • Onboard termination without extra width • Active/passive automatic daisy-chain or jumper pin manual daisy-chain • Passive 330/470 Ohm termination • High current power entry taps positioned near corresponding connector pins for minimum current paths • Rear plug-up long-tail connectors and shrouds configurable to customer needs • Additional user-defined bus lines per custom requirements • Optional decoupling capacitor positions • IEC 61076-4-113 160 pin, five-row DIN connector for J1 and J2 • IEC 61076-4-101 2 mm Hard Metric 133-pin, seven-row connector for J0 • 35 more ground return pins on J1/J2 for improved signal integrity • 38 ground pins on J0 • 46 additional user-defined I/O pins on J2 • 12 spare bus lines for user expandability • Test and maintenance bus supported • Slot geographical addressing • Supports Hot-Swap capability, pre-mating pin connector system • 80 MBps VME64 MBLT data transfer rate 160 MBps Peak Transfer rate using 2edge VME protocol with ETL • +3.3 V, 48 V, and additional +5 V power
|
Comtel Electronics GmbH
VME64x 21 Slot Backplane |  |
|
The 32-bit AT91SAM7S64 is based on a 1.8 V ARM7TDMI core operating at up to 55 MHz
|
GAO Tek Inc.
ATEBSAM7S |  |
|
JTAG interface • One 64-pin extended slot: 22 signal lines address bus, 16-bit data bus, several CS, INT, PWM and MMC/SD extended slot • Power Supply: 9~23 VDC, 500 mA • CPU: Atmel AT91RM9200 (Arm920T), 180 MHz
|
GAO Tek Inc.
GAO 9200C Board |  |
|
ARM Development Tool: GAO IDE for ARM Development Tools Suite A • An integrated development environment • Project management facility • Integrated source-code editor • GNU compilers, assembler and linker • GNU ANSI C library • Also supports ARM build tools
|
GAO Tek Inc.
GAO IDE |  |
|
|
