MEN Micro releases M-Module with four serial interfaces

April 28, 2018 ECD Staff
New M-Module with four serial interfaces
New M-Module with four serial interfaces

The M-Module M77N supports four high-performance UARTs with RS232 or RS422 / 485 interfaces - implemented in the FPGA. These are accessible via a D-Sub connector at the front and can be connected to the carrier card, and thus to the backplane of the system via a 24-pin onboard connection if required. The interface mode of the M-Module can be changed by the software.

The serial lines have been optically isolated, which is essential for use in automotive or industrial applications as well as in mobile environments, for example, to protect the control system from external disturbances such as high voltage pulses.

All components of the M77N are firmly soldered against shock and vibration, and are approved for a temperature range of -40°C to +85°C.

M-Modules – an ANSI-VITA standard since 1997 – are ideally suited for the connection of binary and analog process I/O, robotics, motion and measurement functions. As an extension to all common bus systems such as CompactPCI, ComapctPCI Serial, VMEbus or independent SBCs, mezzanine modules complement each application in a tailor-made and modular manner.

Previous Article
Let hardware do the hard work
Let hardware do the hard work

megaAVR MCUs extend capability of control systems by combining intelligent hardware peripherals with low-po...

Next Article
Renesas R-Car V3H drives automotive front cameras for level 3/4 autonomous vehicles
Renesas R-Car V3H drives automotive front cameras for level 3/4 autonomous vehicles

Based on the IMP-X5+ image recognition engine and optimized for use in stereo front cameras, the R-Car V3H ...

×

Stay updated on processing and related topics with the Processing edition of our Embedded Daily newsletter

Subscribed! Look for 1st copy soon.
Error - something went wrong!