Now on the Development Kit Selector: Teensy 3.2

July 25, 2016 OpenSystems Media

Last week our Technology Editor, Brandon Lewis, announced the reboot of our development kit selector. Every week, we’re going to highlight some of the new or remarkable products that can be found there. We start off with a well-known favorite.

The SparkFun Electronics Teensy 3.2 is a breadboard-friendly development kit designed for flexibility, ease of use and, above all, power in a small package. With its small form factor, powerful microcontroller, Arduino compatibility, and the ability to easily load programs via USB, it delivers.

Here are the highlights:

  • 1.4” x 0.7” form factor
  • Freescale ARM Cortex-M4 at 72 MHz
  • 256 Kb Flash
  • 64 Kb RAM
  • 2 Kb EEPROM
  • USB with DMA
  • 34 digital I/O pins
  • 12 PWM outputs
  • 21 analog inputs

In September 2013, the Teensy 3.1 boasted an upgraded microcontroller, adding the new features outlined above and improving functionality over the Teensy 3.0. Now, the compact Teensy 3.2 provides more power than its predecessor with a 3.3 volt regulator that can directly power the add-on Wi-Fi and Ethernet boards. In addition, Teensy 3.2 is backward compatible with Teensy 3.1 and compatible with shield and add-on boards designed for Teensy 3.1.

Using the Teensyduino add-on, the Teensy 3.2 can be programmed using Arduino Software IDE or with any ID using C.

You can compare the Teensy 3.2 with other development kits using our Development Kit Selector.

Check out the video below.

Jamie Leland, Content Assistant
Previous Article
5D glass discs take storage bandwidth to light speed

As we get closer to reaching the limits of flash capability, we naturally ponder, "What's next?" The Univer...

Next Article
The USB spec continues its march forward

Having spent far too much time wrestling with why, against statistical logic, I invariably only connect a U...

×

Follow our coverage of hardware-related design topics with the Hardware edition of our Embedded Daily newsletter.

Subscribed! Look for 1st copy soon.
Error - something went wrong!